Production of Curdlan Grown on Cassava Starch Waste Hydrolysates

Cassava starch waste hydrolysates (CSWHs) with different degrees of polymerisation, i.e., CSWHs-1, CSWHs-2 and CSWHs-3, were prepared through the hydrolysis of cassava starch waste with thermostable a-amylase from Thermococcus sp. HJ21. The prepared CSWHs were then used as a carbon source for curdlan production with Alcaligenes faecalis ATCC 31749. The amount of curdlan produced and the glucosyltransferase activity during curdlan synthesis increased more obviously when CSWHs-2 was used as the carbon source than when glucose was used. Using both carbon sources, the maximum curdlan production was observed at day 5, and the maximum glucosyltransferase activity was observed at day 4. Glucosyltransferase activity decreased thereafter, and biomass continued to increase until the end of the experiment (day 6). Results indicated that the enhanced curdlan production with CSWHs as the carbon source was highly correlated with glucosyltransferase activity.     

The associations of air pollution exposure during pregnancy with fetal growth and anthropometric measurements at birth: a systematic review and meta-analysis

Environmental Science and Pollution Research - Fetal growth has been demonstrated to be an important predictor of perinatal and postnatal health. Although the effects of maternal exposure to air...     

A fragment constant QSAR model for evaluating the EC50 values of organic chemicals to Daphnia magna.

The quantitative relationship between the median effective concentration (EC50) of organic chemicals to Daphnia magna and the number of molecular fragments was investigated based on experimental EC50 values for 217 chemicals derived from the literature. A fragment constant model was developed based on a multivariate linear regression between the number of fragments and the logarithmically transformed reciprocal values of EC50. Functional correction factors were introduced into the model. The model was verified using an independent set of randomly selected data. The mean residual of the final model was 0.4 log-units. The robustness of the model was discussed based on the results of three jackknife tests.     

渭河干流(宝鸡段)表层沉积物Cu、Zn、Pb污染特征与评价

对渭河干流（宝鸡段）表层沉积物中重金属Cu、Zn、Pb含量进行了调查，用潜在生态危害系数法对其污染水平进行了评价，并与松花江（吉林市段）、淮河（江苏段）、长江（下游）、苏州河、珠江（广州段）5条河流表层沉积物中Cu、Zn、Pb的含量做了对比研究。结果表明，3种重金属元素平均含量均超出相应的土壤背景值，出现了一定程度上的富集；生态危害系数均〈40，属轻微生态危害。重金属含量水平在国内诸河中处于中间位置。     

警用头盔的人机工程学分析

警用头盔是武警部队使用最为频繁的单兵防护用具，本文基于人机工程学的理论，用人机工程学的观点对武警部队现装备的警用头盔进行分析和探讨，提出解决途径的设想，展望警用头盔的发展前景。     

Seasonal variations in microcystin concentrations in Lake Taihu, China

An enzyme-limited immunosorbent assay (ELISA) was used to monitor spatial and temporal variation of microcystins (MCs) in Lake Taihu. MC concentrations were higher in summer and autumn than in other seasons. Maximal MC concentration was 15.6 mug L(-1). Compared to central Lake Taihu and Wuli Bay, Meiliang Bay had higher MC concentrations due to high biomass of Microcystis.     

家居室内设计及新进展的思考

在对传统室内设计基本观点阐述与理解的基础上分析其整体性、可持续发展,并着重探讨在物质文明和精神文明高度发展的今天,现代室内设计在个性化、自然性、现代性、艺术性等方面发展的新趋势.通过对现代室内设计特点和发展趋势的分析,创造出一个适合人们现代生活的理想空间.     

动态膜-生物反应器处理城市污水的运行特性研究

考察了孔径108μm左右的不锈钢丝网动态膜组件处理城市生活污水的特性,并研究了出水水头和曝气强度对动态膜泥饼层形成的影响.结果表明,稳定运行情况下出水平均浊度1.2NTU,COD平均去除率90%,NH<,3>-N平均去除率97%,与传统膜-生物反应器处理效果接近.同时发现,在20、40mm的出水水头下,动态膜运行初期膜通量衰减规律均符合泥饼阻力模型.     

序批式反应器生物强化处理苯酚废水的研究

将4株高效苯酚分解菌湿菌体分3批投加于序批式反应器(SBR),对活性污泥进行生物强化试验,分析活性污泥状态与性能变化,测定生物强化后对苯酚的降解能力.结果表明,随着生物强化过程的进行,沉降性能改善,污泥颗粒化趋势明显;生物强化后,活性污泥对苯酚降解能力、降解速率及对苯酚的耐受性明显提高:苯酚质量浓度为730～960mg/L时,苯酚完全降解时间可由正常的6h缩短至2h;6h内可完全降解苯酚的质量浓度由原来的880mg/L提高到2080mg/L,处理能力提高了1.36倍;当进水苯酚质量浓度增加到2400mg/L时,6h内污泥对苯酚的降解率仍达到60.1%.     

有毒气体危害区域划分之临界浓度标准研究

通过研究毒物伤害准则进而界定有毒气体危害浓度,对有毒气体泄漏扩散后的危害区域进行分级划分,以采取相应的防护措施,最大限度的即时有效的减轻有毒气体对人员的伤害.最后,以氯为例,对比其在不同伤害准则下危害区域划分临界浓度标准值,数值差别较大,因此在使用时应根据实际情况加以判断,选择最适当的标准来划分危害区域.